Residential heat pump installations: the role of vocational education and training
This article presents a short summary of: 'Residential heat pump installations: the role of vocational education and training', by Colin Patrick Gleeson. It originally appeared in Building Research & Information, in September 2015 and is available online at: DOI:10.1080/09613218.2015.1082701.
Meeting European emissions targets is reliant on innovative renewable technologies, particularly ‘renewable heat’ from heat pumps.
Heat pumps transfer heat from a lower-temperature source to one of a higher temperature. This is the opposite of the natural flow of heat. Heat pumps can be used to extract heat from sources such as the ground, air or water which can be used to provide hot water, space heating or used for other applications such as heating swimming pools.
Heat pump performance is driven by Carnot efficiency (the differential between input and output temperatures), and optimum performance requires the lowest possible space heating flow temperatures. This means that heat pump performance is highly sensitivity to poor design and installation. The correct operation of heating system controls is also critical to performance and this places additional demands on installers in terms of commissioning and handover instructions.
Gleeson’s paper raises concerns about the adequacy of vocational training and skills for installing residential air heat pumps. It suggests that few UK installers have formal heat pump qualifications at National Vocational Qualification (NVQ) level 3 and that heat pump vocational education and training is generally delivered through short-course provision where the structure of training is largely unregulated with no strict adherence to a common syllabus or a detailed training centre specification. Prerequisites for short-course trainees is limited and proof of ‘experience’ is an accepted alternative to formal educational qualifications.
The paper suggests that the lack of broader educational content and deficiencies in engineering knowledge will have profound negative impacts on the performance and market acceptance of heat pumps.
A range of possible futures are identified to address these problems.
Click here to read the full paper.
--Building_Research_&_Information
[edit] Related articles on Designing Buildings Wiki:
- Absorption heat pump.
- A decade for heat pumps.
- Air source heat pumps.
- BSRIA domestic hot water heat pumps testing.
- Coefficient of Performance CoP.
- Domestic heat pumps and the electricity supply system.
- Dynamic thermal modelling of closed loop geothermal heat pump systems.
- Earth-to-air heat exchangers.
- Ground source heat pumps.
- Heat exchanger.
- Heat pump.
- Heat recovery.
- Phase change.
- Renewable energy sources: how they work and what they deliver: Part 3: Electrically driven heat pumps DG 532 3.
- Water source heat pumps.
Featured articles and news
CIOB report; a blueprint for SDGs and the built environment
Pairing the Sustainable Development Goals with projects.
Latest Build UK Building Safety Regime explainer published
Key elements in one short, now updated document.
UKGBC launch the UK Climate Resilience Roadmap
First guidance of its kind on direct climate impacts for the built environment and how it can adapt.
CLC Health, Safety and Wellbeing Strategy 2025
Launched by the Minister for Industry to look at fatalities on site, improving mental health and other issues.
One of the most impressive Victorian architects. Book review.
Common Assessment Standard now with building safety
New CAS update now includes mandatory building safety questions.
RTPI leader to become new CIOB Chief Executive Officer
Dr Victoria Hills MRTPI, FICE to take over after Caroline Gumble’s departure.
Social and affordable housing, a long term plan for delivery
The “Delivering a Decade of Renewal for Social and Affordable Housing” strategy sets out future path.
A change to adoptive architecture
Effects of global weather warming on architectural detailing, material choice and human interaction.
The proposed publicly owned and backed subsidiary of Homes England, to facilitate new homes.
How big is the problem and what can we do to mitigate the effects?
Overheating guidance and tools for building designers
A number of cool guides to help with the heat.
The UK's Modern Industrial Strategy: A 10 year plan
Previous consultation criticism, current key elements and general support with some persisting reservations.
Building Safety Regulator reforms
New roles, new staff and a new fast track service pave the way for a single construction regulator.
Architectural Technologist CPDs and Communications
CIAT CPD… and how you can do it!
Cooling centres and cool spaces
Managing extreme heat in cities by directing the public to places for heat stress relief and water sources.
Winter gardens: A brief history and warm variations
Extending the season with glass in different forms and terms.
Restoring Great Yarmouth's Winter Gardens
Transforming one of the least sustainable constructions imaginable.